Compact Handheld Radio Remote Control SAGA L4-L6-L8
Praticality for any non-safety industrial application - RADIO TRANSMISSION WITH QUARZ
L series is a high technology radio control equipment and its flexibility gives a solution for every industrial application.
Special functions are programmable by SOFTWARE available for customers.
- Strenght guaranteed by a water resistant and shock resistant enclosures
- Modern design; pocket size and light weight (155g)
- Extremely long battery life: 300 hourse of continous transmission
- Designed for mobile and industrial application
- Programmable special functions
- Remote ID settings
- Operating distance up to 100m
- Suitable for use in industrial application, and in presence of strong vibrations and heavy workloads
This kind of equipment is closed to the lifting sector on board of cranes, hoists and cranes in the EC area.
Request information about this product
Main Features
- Frequency FM 33.0825/434.6875 Mhz
- Radio module: 1-channel quartz oscillator
- Operating temperature -45°C + 80°C
- Operating distance up to 100m
- Hamming distance >4
- ID codes over 4,1 billions (32 bit)
- Enclosures nylon + glass fiber (IP65 equivalent)
Transmitter Technical Features
- L x W x H = 120 x 55 x 25 mm
- Weight 120 g (without battery)
- Power supply 2 AA size 1,5 V
- RF output power <4mW
- Max. Current Consumption 10 mA
- Standby current less than 1 micro A
- Jammed button detection
- Low battery indicator
Receiver Technical Features
- L x W x H = 161 X 74 X 52mm
- Weight = 1000 g (without cable)
- Power supply 12/24 Vac/dc - 110-220 Vac
- Current consumption at 24 Vac/dc - 20 mA on stand by - +50 mA for each activated relay
- Relay contacts 250 Vac - 10 A
- Insulation voltage 15 KV
EC Regulations
- Safety - EN 60950
- EMC - EN 301 489/03 - EN 61000/6/2
- Radio - EN 300 220/3
Global approvals:
Jelly Cover
Transparent soft protection for transmitter
Receiver Fixing and Wiring Cable
Standard equipment with 4 shock absorber mount.
Standard connection cable wired
Remote Type Antenna
Antenna is easily remotable with BCN connector.
USB PC Cable
To be able to program, all you need is the software (free) to be
requested by filling in the contact card and USB programming cable
(optional), to be ordered with the kit remote control.
Battery Charger
230 Vac - 2 set of 2400mA rechargeable batteries included
Multi Function Battery Charger
Complete with plug for car, USB plug and 2 set of 2400mA rechargeable batteries.
Antennas
Cable to remotely locate the antenna when the receiver is installed inside a control cabinet.
Dipole antenna to increase the reception up to 150m in open field.
Copier
It's available a copier to make a quick copy of the program and a programming software for special functions which can be accessed via USB port and a Pc with Windows System.
Request information about this product
